Product Categories
Social Media

Hot Tags:

Auto Emergency Booster CableAuto Emergency Booster Cable With Surge ProtectionAuto Emergency Jump Cablejump cablebooster cableBattery cable

800 AMP Booster Cable Battery Cable Jump Cables Jump Leads with Surge Protection

Title: 800AMP boostercable with protection Specification: Adva ntage: ● Strongly cable connected ● High & Low temperature resistance ● High quality ● Competitive price ● jump lead batteries in cars, trucks, snowmobiles, ATVs, within 12/24 Volt ● OEM:accepted ● Payment:TT,L/C ● Port:shanghai...

Product Details

Title:800AMP boostercable with protection

Specification:

Model

HX-G034

Description

0.32x559xOD14mmx5M

Colors

Red & Black

Main Materials

CCA.PVC PLASTIC.STANDARD STEAL

Pack Style

Zipper Bag+Paper Card

Certification

None

Advantage:

Strongly cable connected

High & Low temperature resistance

High quality 

Competitive price

jump lead batteries in cars, trucks, snowmobiles, ATVs, within 12/24 Volt

OEM:accepted

Payment:TT,L/C

Port:shanghai or ningbo

How to Jump a Car

Step 1

Drive the running automobile as close as you can to the car with the dead battery, hood to hood if possible.

Step 2

Turn off the engines and power of both cars, put them in park and raise their hoods.

Step 3

Locate the battery in each car and the positive and negative terminals.

Step 4

Wipe the area around the terminals clear of dirt and battery acid, being careful not to allow it to come in contact with your skin.

Step 5

Jumper cables

Connect one clamp of one end of the jumper cable to the positive terminal of the dead battery. Then connect the corresponding clamp at the other end to the positive terminal of the good battery.

Step 6

Connect the other cable clamp to the negative terminal of the dead battery. Then, connect the other end to the negative terminal of the good battery.

Step 7

Turn the ignition on of the car with the good battery. Make certain that the lights and radio are off. Allow the car to run for a few minutes, then turn it off.

Step 8

Attempt to start the dead battery car.

Step 9

Turn the functioning car on again. If the dead battery didn't kick start the car, while the functioning car was off, you need to turn on the ignition while the car is running. Give the good car a moment or two to charge the batteries, then start the car with the bad battery as you normally would. It should turn right over.

How to Jump Start a Dead Car Battery?  

1. Connect the car battery intelligent clamps to the dead battery of the Car. The RED clamp to the positive “+” terminal and the BLACK clamp to the negative “-” terminal.

2. Connect the intelligent clamps with our LIPOWER multi-function car jump starer.

3. Press the On/Off button of LIPOWE T8 until the blue battery light indicator is ON.

4. Now attempt to crank start the car engine.

5. After the engine’s started successfully, remove the jump start clamps.

The video documents will be sent if needed.

If the you are looking for the 800 amp booster cable battery cable jump cables jump leads with surge protection, welcome to contact us. We are one of the largest China manufacturers and suppliers in this field, offering you the customized service with low price. Please be free to place an order of the quality products made in China.

Related Products
Inquiry